Coating Thickness Tester
R5,548.75
Features :
- Dual technology
- Automatic selection of magnetic induction or Eddy Current measurement techniques
- Memory 320 reading
- Non-magnetic coating (paint, zinc) on steel
- Insulating Coatings (paint) on non-ferrous metals
- No-ferrous metal coatings on insulating substrates
- Continue & Single mode
- Working modes: Direct & Group
- Static display : Min / Max / Average / No / S.Dev
- High / Low alarm
- USB Interface
The MT155 is a compact and handy gauge, designed for non-destructive, fast and precise coating thickness measurements. It is adaptable and can be used on special geometries or on materials with special properties. The coating thickness gauge works either on the magnetic induction principle or on the eddy current principle, depending on the type of probe used, the MT155 has 31 working modes. The MT155 display the measured values and user information on the LCD, the back light ensures easy reading of screen data in dark conditions. The probe systems are spring-mounted in the probe sleeve this ensures safe and stable positioning of the probe and constant pressure. The hemispherical tip of the probe is made of hard and durable material.
Accessories:
Hard Carrying case
2 x AAA Batteries
Instruction manual
Software CD
USB Cable
Coating Thickness Standards
Downloads
Additional information
| Sensor Probe F | Fe |
|---|---|
| Sensor Probe N | Non-Fe |
| Working principle F | Magnetic Induction |
| Working principle N | Eddy current principle |
| Measuring Range F | 0-1350μm, 0-53.1 mils |
| Measuring Range N | 0-1350μm, 0-53.1 mils |
| Guaranteed Tolerance F | 0-1000μm ±(2.5%+2μm), 0-39.3mils ±(2%+0.08mils) |
| Guaranteed Tolerance N | 0-1000μm ±(2.5%+2μm), 0-39.3mils ±(2%+0.08mils) |
| Resolution Precision F | 0μm – 100um (0.1 urn) |
| Resolution Precision N | 0μm – 100um (0.1 urn) |
| minimum curvature radius F | 1.5mm |
| minimum curvature radius N | 3mm |
| Diameter of minimun area F | 7mm |
| Diameter of minimun area N | 5mm |
| Basic critical thickness F | 0.5mm |
| Basic critical thickness N | 0.3mm |
| Calibration Procedure | Yes |
| Digital Display | LCD Display |
| Bargraph | Yes |
| Over-range indication | Yes |
| Min Max | Yes |
| Memory | 1500 readings |
| Interface | USB for PC analysis software |
| Back Light | Yes |
| Enclosure | Moulded casing |
| Low battery indication | Yes |
| Power Supply | 2 x AAA Batteries |
| Weight | 110g |
| Dimensions | 113.5 x 54 x 27mm |
Related products
