Intrinsically Safe NCV Detector
R1,121.25
Features :
- Intrinsically Safe
- 12V to 1000V detection
- Thinner probe tip for working with socket outlets
- Green LED means Power on, flashing red LED with beeper means Voltage detected
- Two modes, green indicates high voltage mode, Yellow LED 12V Mode
- Flash and beep rate increases as the detector gets closer to the voltage.
- Power On/Off with silent mode
- IP67 waterproof and withstand a 2m drop-proof
- CAT IV 1000V
The MT405EX is an intrinsically safe NCV Voltage Detector for use in potential explosive environment. The MT405EX is certified in accordance with the ATEX directive EX ll 2 G EX ib llB T4 Gb in Zones 1 and 2. The NCV voltage detector has a dual range, a low measuring range down to 12 volts and a high measuring range from 12V to 1000V. Suitable for outlets or against wire insulation testing, this non-contact AC Voltage Detector has a switch to turn the unit on and a Green LED indicates it is working. There is a Red LED, an audible sound as well as a vibration to indicate the presence of voltage. It has a rugged double moulded IP67 waterproof housing that can withstand a 2m drop. There is a bright built-in LED flashlight ideal for use in dimly lit areas.
Additional information
Non-Contact Voltage (NCV) | Yes |
---|---|
AC Voltage | 12 to 1000V |
Frequency | 50/60Hz |
Voltage Detector 100V - 1000V | Red LED Audiable Beep |
Voltage Detector 12V - 1000V | Yellow then Red LED Audiable Beep |
Voltage Detector Audible | Continuous Beep |
Power On Indicator | Green LED |
Flash Light | LED |
Enclosure | Double moulded waterproof IP67 |
Low battery indication | Self Test |
Power source | 2 x R03 |
Weight | 55g |
Dimensions | 160 x 23 x 25mm |